1/6/2024 0 Comments Gamepad companion hatswitchUniversal (used as the out-of-the-box controller for at least two major gaming systems): There are two main classes, universal and specialized, and notable one-off gimmicks worth mention also appear here. That may be great for Windows users, but it makes it a pain to use it on a Mac.The typical array of controllers used with video game systems over the years. I am assuming the F310 would be the same way since all of these Logitech controllers have the XInput and DirectInput modes built into one gamepad. I have a feeling that's what I'll use in the future since that will be a lot simpler. I ordered a Cordless RumblePad 2 from a retailer that still had it in stock. It won't matter if you leave the F710 in 'D' mode. Unfortunately, the default mode on the F710 is the XInput mode which doesn't work on the Mac. Unfortunately, if you shut your Mac down at night like I do, you'll have to go through the same steps to reattach the F710 to the Mac. If your game doesn't support HID Manager, then you'll need a program like Carvware's Gamepad Companion or USB Overdrive in order to map the buttons, hatswitch, or analog sticks to keystrokes. If your game uses HID Manager, then you won't need to do anything else in order for your gamepad to work. Re-insert the battery into the F710 When you look at System Information now, the device should be shown as 'Logitech Cordless RumblePad 2'. Re-insert the nano USB receiver into the iMac 5. Remove the nano USB receiver from my iMac 3. Change the F710 to 'D' (DirectInput) mode 2. To do this, I had to do the following things in this order: 1. I was finally able to get this to work without starting up Windows. Initially, I had to start up Fusion and switch the F710 under Windows in order for the change to be reflected on the Mac. Otherwise, Fusion was intercepting the change in USB device ID and wasn't passing it along to the Mac. In my case, I needed to disable USB 2 support in VMWare Fusion. System Information needs to show it as a 'Logitech Cordless Rumblepad 2' in order for it to work on the Mac. That won't work since there isn't an XInput driver for the Mac that works with the F710 as far as I know. When I looked at System Information, it still said it was a Logitech F710 gamepad. First of all, simple changing the switch to 'D' wasn't enough. Darwinmac 6:45 PM Re: Using a Logitech Game Controller F310 in response to trickytye In case anyone stumbles upon this thread, I did get my Logitech F710 to work on my iMac. FYI Mangolassi needs some sort of quoting feature. Here is a guy who's found out how to get the F710 to work on MAc. I wanted to use my F510 gamepad with a game. I have a Windows 10 virtual machine (using Parallels Desktop v11) on my Mac (OS X Yosemite). Win 7 wireless bit utility mouse windows 7 windows vista win logitech gaming optical 1.1 ray edge gamepad QuickCam 6.15.25 3.04 logitech setpoint 6.20.64 4.80 5.10.127 setpoint Rumble trackball 7500 f310 gamepanel utility 80 for t r0001 f510 g110 gamepanel g u0001 diNovo 4.8 logitech setpoint driver g u0002 m570 m bu115 setpoint driver rx300. When it is in XInput mode the Tattiebogle driver is used. When it is in DirectInput mode the system provided driver is used. I am on a MacBookPro (Mid 2009) using a Logitech F510 gamepad, that can be switched between DirectInput and XInput. So I did these things: Installed the Logitech Gaming Soft.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |